Asus Motherboard P5VDC-MX - Manual (Page 93)

A S U S P 5 V D C - M X A S U S P 5 V D C - M X A S U S P 5 V D C - M X A S U S P 5 V D C - M X A S U S P 5 V D C - M X 3 - 1 1 3 - 1 1 3 - 1 1 3 - 1 1 3 - 1 1
8. If you select <Y> the utility will duplicate your data. Press <Y>
anytime if you want to exit the duplication process.
3. From this point, you can auto-configure the RAID array by selecting
A u t o S e t u p f o r D a t a S e c u r i t y
A u t o S e t u p f o r D a t a S e c u r i t y A u t o S e t u p f o r D a t a S e c u r i t y A u t o S e t u p f o r D a t a S e c u r i t y A u t o S e t u p f o r D a t a S e c u r i t y or manually configure the RAID
array for mirrored sets. If you want to auto-configure, proceed to the
next step, otherwise, skip to step 6.
4. Select A u t o S e t u p f o r D a t a S e c u r i t y A u t o S e t u p f o r D a t a S e c u r i t y A u t o S e t u p f o r D a t a S e c u r i t y A u t o S e t u p f o r D a t a S e c u r i t y A u t o S e t u p f o r D a t a S e c u r i t y and press <Enter>. The
following confirmation message appears.
The data on the selected disks will
be destroyed. Continue? (Y/N)
10. Press <Y> to confirm or <N> to return to the configuration options.
11. Press <Esc> to go back to main menu.
Auto create array will destroy all
data on disks, Continue? (Y/N)
5. Press <Y> to confirm or <N> to return to the configuration options. If
you selected <Y>, proceed to step 11.
6. Select S e l e c t D i s k D r i v e s S e l e c t D i s k D r i v e s S e l e c t D i s k D r i v e s S e l e c t D i s k D r i v e s S e l e c t D i s k D r i v e s, then press <Enter>. Use arrow keys to
select disk drive/s, then press <Enter>. An asterisk appears before a
selected drive.
7. Select S t a r t C r e a t e P r o c e s s S t a r t C r e a t e P r o c e s s S t a r t C r e a t e P r o c e s s S t a r t C r e a t e P r o c e s s S t a r t C r e a t e P r o c e s s and press <Enter> to setup hard disk
for RAID system. The following inquiry appears:
Save the data on source disk to
mirror after creation? (Y/N)
Duplicating...
RAID 1 for data protection
Press Yes(Y) to Escape
9. If you select <N>, the following confirmation message appears.