GE GTDS825GDMC - Manual (Page 7)

7
Sensor Dry
Time Dry This feature is activated in Timed Dry & Quick
Fluff cycles. The time (10, 20, 30, 40, . . . 80, 90,
99) is specified via the Time button.
This feature activated in all but the Timed
(Timed Dry & Quick Fluff) and Steam (Steam
Refresh & Steam Dewrinkle) cycles.
The Sensor Dry provides greater drying
accuracy than standard machines, resulting
in shorter dry times and better clothes care.
As the clothes tumble, they touch a moisture
sensor. The sensor will stop the heating cycle
as soon as the clothes have reached the
selected dryness.
This dryer will adjust the initial estimated
drying time of the sensor dry cycles as it
“learns” its installation and usage profile.
Please allow several weeks for the dryer to
customize itself to “you”.
Stainless Steel Drum
Drum Light
The stainless steel used to make the dryer drum
provides the highest reliability available in a GE
dryer. If the dryer drum should be scratched
or dented during normal use, the drum will not
rust or corrode. These surface blemishes will not
affect the function or durability of the drum.
The drum light is an LED light. Replacement must
be done by a qualified technician.
About the dryer features.
More Options
Drum Light
The drum light will go on if the Drum Light button is pushed or the door is opened. It will stay on until the door is shut or the Drum
Light or Power button is pushed.
Variable Signal
Use the Variable Signal button to change the volume of the end of cycle and control signals. Press the button until you reach the
desired volume (low-med-high) or off. The clothes should be removed when the beeper goes off so wrinkles do not set in.
NOTE:
‡ Remove garments promptly at the sound of signal. Place clothes on hangers so wrinkles will not set in.
‡ Use the Variable Signal especially when drying fabrics like polyester, knits and permanent press. These fabrics should be removed
so wrinkles will not set in.
Control Lock
You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a
cycle. Children cannot accidentally start the dryer by touching buttons with this option selected.
7RORFNWKHGU\HUFRQWUROV press and hold the Drum Light and Variable Signal buttons at the same time for 3 seconds. The control
lock icon will light up when locked. 7RXQORFNWKHGU\HUFRQWUROV press and hold the Drum Light and Variable Signal buttons at
the same time for 3 seconds.
My Settings
As the cycle selector knob is turned, the Time (Timed Dry), Level (Dryness Level), and Temp (Temperature) settings change to
automatic pre-set default settings. If you desire a different setting, press the appropriate button(s). Then press and hold the My
Settings button for 3 seconds. The status heart and button lights will turn on and the dryer will save these settings for that knob
selection. In the future, when you turn the selector knob to that cycle, your settings will be automatically recalled.
To temporarily (for this load) return to the pre-set default settings, depress the My Settings button for 1/2 second. The status heart
and button lights will turn off and the options will change back to these defaults. To make these default settings permanent, hold the
My Settings button again for 3 seconds to make them your preferred settings (the lights will turn back on).
NOTE: Variable Signal volume cannot be set for My Settings.
G
GEAppliances.com