GE JTP90DPBB - Manual (Page 23)

23
GEAppliances.com
/RZHU2YHQ&RQWURO&ORFNDQG7LPHU)HDWXUHVDQG6HWWLQJV
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-
cleaning mode and the times set for the timer or
automatic oven operations.
NOTE: The time on the lower oven display is
VKRZQLQKRXUVDQGPLQXWHV  LVRQHKRXU
PLQXWHV 2QWKHPLFURZDYHRYHQWLPHLVVKRZQ
LQPLQXWHVDQGVHFRQGV  LVRQHPLQXWH
VHFRQGV 
If “F– and a number or letter” flash in the
display and the oven control signals, this
indicates a function error code. Press the
Clear/Off pad. Allow the oven to cool for one
hour. Put the oven back into operation. If the
function error code repeats, disconnect the
power to the oven and call for service.
If your oven was set for a timed oven
operation and a power outage occurred, the
clock and all programmed functions must be
reset.
The time of day (may be incorrect) will flash in
the display when the there has been a power
outage.
%URLO+L/R3DG
Press to select the broil function.
Bake Pad
Press to select the bake function.
6HOI&OHDQ3DG
Press to select the self-cleaning function. See
the Using the self-cleaning lower oven section.
Oven Light Pad
Press to turn the oven light on or off.
Number Pads
Use to set any function requiring numbers such
as the time of day on the clock, the timer, the
oven temperature, the start time and length of
operation for timed baking and self-cleaning.
&OHDU2II3DG
Press to cancel ALL oven operations except the
clock and timer.
Start Pad
Must be pressed to start any cooking or
cleaning function.
.LWFKHQ7LPHU2Q2II3DG
Press to select the timer feature.
Delay Start Pad
Use along with Cooking Time or Self Clean pads
to set the oven to start and stop automatically
at a time you set.
Cooking Time Pad
Press and then press the number pads
to set the amount of time you want your food to
cook. The oven will shut off automatically when
the cooking time
has run out, unless the Cook and Hold feature
was set.
Clock Pad
Press before setting the clock.