AEG L 60260 TL - Manual (Page 14)

SETTING AND STARTING A PROGRAMME
1. Turn the programme knob.
2. The indicator of button 4 flashes
with red colour.
3. The indicators of the default tempera-
ture and spin speed come on. To
change the temperature and/or the
spin speed, press the related buttons.
4. Set the available functions and the
delay start. When you press the rele-
vant button, the indicator of the set
function comes on or the display
shows the related symbol.
5. Press button 4 to start the pro-
gramme. The indicator of button 4
is on with red colour.
INTERRUPT A PROGRAMME
1. Press button 4 . The indicator flash-
es.
2. Press button 4 again. The washing
programme continues.
CANCEL A PROGRAMME
1. Press button 1 to cancel the pro-
gramme and to deactivate the appli-
ance.
2. Press button 1 again to activate the
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1. Press button 4 . The indicator flash-
es.
2. Change the function set.
SET THE DELAY START
1. Press button 5 again and again until
the display shows the number of mi-
nutes or hours.
2. Press button 4 , the appliance starts
the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.
Before you press button 4 to
start the appliance, you can cancel
or change the set of the delay
start.
You cannot set the delay start with
the Steam programme.
CANCEL THE DELAY START
1. Press button 4 . The related indica-
tor flashes.
2. Press button 5 again and again until
the display shows 0’.
3. Press button 4 . The programme
starts.
OPEN THE LID
While a programme or the delay start op-
erates, the lid is locked.
To open the lid:
1. Press button 4 . You can open the
lid 2 minutes after the appliance
stops. The door lock symbol in the
display goes off.
2. Open the lid.
3. Close the lid and press button 4 .
The programme or the delay start
continues.
If the temperature and level of the
water in the drum are too high,
the door lock symbol stays on and
you cannot open the lid . If neces-
sary, do the following procedure
to open the lid.
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that there is no wa-
ter in the drum.
If you deactivate the appliance, it
is necessary to set the programme
again.
14 www.aeg.com