Asus Motherboard P5MT-S - Manual (Page 40)

2-20 Chapter 2: Hardware information
4. Keyboard/Mouse power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard/mouse
wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up
the computer when you press a key on the keyboard (the default
is the Space Bar) or use the mouse. This feature requires an ATX
power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
5. VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard ATI ®
RAGE-XL PCI VGA controller. Set to pins 1-2 to activate the VGA
feature.
P
5 M
T
-S ®
P5MT-S Keyboard Power Setting
KBPWR1
(Default)
+5V +5VSB
2 3 1 2
P
5 M
T
-S ®
P5MT-S VGA Setting
VGA_EN1
Enable
(Default)
Disable
2
1
2
3