American Dynamics Matrix Keyboard - Manual (Page 11)

ADTTE Matrix Keyboard Overview 1-3
9. Auxiliary On (PG-Left) / Auxiliary Off
(PG-Right) buttons activate and deactivate
features such as lights, locks, or alarms that
can be controlled by the keyboard. See
Chapter 3 for additional information.
These buttons also serve as the Page Left
and Page Right functions during menu
programming.
10. Pswd button sets or changes the keyboard
lock password. There are two types of
passwords: Permanent and User Defined.
See Chapter 2 for specific instructions.
11. Shot (Enter) / Pattern (Exit) buttons
create and display pre-defined scenes from
a specified camera.
The Shot button serves as the Enter
function during menu programming. The
Pattern button serves as the Exit function
during menu programming.
12. Config button is used to adjust special
keyboard settings, such as backlighting and
key click volume.
13. Menu button is used to call up the main
menu of the attached switching system.
When the switching is displayed, the
keyboard’s menu programming functions
become available. This button is under
keyboard lock protection.
14. Ack button acknowledges system alarms.
The keyboard beeps until the alarm is
acknowledged.
15. Iris Open (PG-DN) button adjusts the
brightness of a scene by allowing
additional light into the camera controlled
by the keyboard. See Chapter 3 for more
information.
This button also serves as the Page Down
function during menu programming.
16. Iris Close (PG-UP) button adjusts the
brightness of a scene by allowing less light
into the camera controlled by the keyboard.
See Chapter 3 for more information.
This button also serves as the Page Up
function during menu programming.
17. Camera button ( ) calls a specified
camera's input to the monitor that is
currently controlled by the keyboard. See
Chapter 3 for specific instructions.
18. Numeric Keypad is used to enter
numbers associated with monitors,
cameras, passwords, and users.
19. Monitor button ( ) calls a specified
monitor to be controlled by the keyboard.
Refer to Chapter 3 for specific instructions.
20. Clear button erases numbers entered on
the numeric keypad (see 18) before
pressing an action key, such as Camera,
Monitor, or Pswd.
21. Next (
→) button displays the next
camera's input in a monitor tour or alarm
tour that is currently on hold.
This button also serves as the Cursor Right
function during menu programming.
22. Last (
←) button displays the previous
camera's input in a monitor tour or alarm
tour that is currently on hold.
This button also serves as the Cursor Left
function during menu programming.
23. Salvo displays a pre-defined group (salvo)
of camera inputs on a group of contiguous
monitors, beginning with the currently
selected monitor. See the system operating
instructions for additional information.