ASKO D3 - Manual (Page 11)

Page 11
4-inc 4-inc 4-inc 4-inc 4-inch h h h h T T T T Toe Kic oe Kic oe Kic oe Kic oe Kick Installa k Installa k Installa k Installa k Installations tions tions tions tions
Custom panel extends to cabinet top
One installation option for a 4” toe kick is to extend the
custom panel to the cabinet top (as illustrated below).
D3252XLFI, D3252XLFI, D3252XLFI, D3252XLFI, D3252XLFI, D3532XLFI, D3532XLFI, D3532XLFI, D3532XLFI, D3532XLFI, AND D3532XLFIWS CUST AND D3532XLFIWS CUST AND D3532XLFIWS CUST AND D3532XLFIWS CUST AND D3532XLFIWS CUSTOM P OM P OM P OM P OM PANEL ANEL ANEL ANEL ANEL
INST INST INST INST INSTALLA ALLA ALLA ALLA ALLATION OPTIONS TION OPTIONS TION OPTIONS TION OPTIONS TION OPTIONS
6-inc 6-inc 6-inc 6-inc 6-inch h h h h T T T T Toe Kic oe Kic oe Kic oe Kic oe Kick Installa k Installa k Installa k Installa k Installations tions tions tions tions
XL units are not designed to accomodate a 6 inch
toe kick installation. If you need a 6 inch toe kick
installation, you should install an Asko standard
tank dishwasher model D3122 or D3252FI.
One-Piece Custom One-Piece Custom One-Piece Custom One-Piece Custom One-Piece Custom
Door Panel Door Panel Door Panel Door Panel Door Panel
A one-piece custom door panel
with a curved handle is now
available for the FI dishwashers.
This door is available in stainless
steel (as shown), black, and white.
To order this door panel, contact
your dealer.
These doors are designed for 4” toe
kick installations.
Panel extends from toe kick to cabinet top
4-inch toe kick
30 1/8" 765 mm
23-1/2"
597 mm
ADJUSTING THE DOOR SPRINGS ADJUSTING THE DOOR SPRINGS ADJUSTING THE DOOR SPRINGS ADJUSTING THE DOOR SPRINGS ADJUSTING THE DOOR SPRINGS
After you install the custom panel,
make sure the door stays in place at
any angle. If it tends to fall down, pull
out the machine and tension the door
springs on the sides of the machine
by moving them one hole farther back
or by twisting the spring to make it
shorter. If that doesn’t resolve the
problem, you may need to purchase
the heavy-duty door springs (part
number 8076163-77).
1. Locate the screw heads in the keyholes and push the wood panel to
one side and align with the door. (Figure 5)
2. Clamp the wood panel to the dishwasher door to keep it securely in
place.
3. Open the dishwasher door and screw the wood panel into position
with the four long screws, two on either side. (Figure 6)
.
MOUNTING MOUNTING MOUNTING MOUNTING MOUNTING THE THE THE THE THE W W W W WOOD P OOD P OOD P OOD P OOD PANEL ANEL ANEL ANEL ANEL