GE ZIS480NX - Manual (Page 26)

26
Questions?
Use this
problem
solver!
The Problem Solver
Built-In Refrigerators
PROBLEM POSSIBLE CAUSE
WATER DISPENSER • Water supply line turned off, restricted or not connected. Call your
DOES NOT WORK installer for proper water supply line connection.
• Water filter clogged. Replace the filter or use the filter bypass plug.
• The CONTROL LOCK on the dispenser has been activated.
To unlock the dispenser, touch CONTROL LOCK for 3 seconds.
• Air may be trapped in system. Press the dispenser arm for at least
2 minutes.
ICE DISPENSER • Ice bin improperly installed. See Ice storage bin.
DOES NOT WORK
• Icemaker turned off or water supply turned off. Turn on icemaker
or water supply.
• Ice cubes are frozen to the icemaker feeler arm. Remove cubes.
• Irregular ice clumps in storage bin. Break up with fingertip pressure
and discard remaining clumps.
• Freezer may be too warm. Adjust freezer control to a colder setting,
one position at a time, until clumps do not form.
• Water filter clogged. Replace the filter or use the filter bypass plug.
• The CONTROL LOCK on the dispenser has been activated.
To unlock the dispenser, touch CONTROL LOCK for 3 seconds.
WATER SPURTING • Newly installed filter cartridge. Run water from the dispenser for
FROM DISPENSER 3 minutes (about one and a half gallons).
NO WATER OR ICE • Water supply line turned off, restricted or not connected. Call your
PRODUCTION installer for proper water supply line connection.
• Water filter clogged. Replace the filter or use the filter bypass plug.
CUBED ICE WAS • Last setting was CRUSHED ICE. A few cubes were left in the crusher
SELECTED BUT from the previous setting. This is normal.
CRUSHED ICE
• If continual crushed ice is dispensed while cubed ice is selected,
WAS DISPENSED
adjust ice bin. See Ice storage bin.
• Packaging. Increase time or re-package in plastic.
• Wrong weight selected. Select a larger weight.
• Item with high fat content. Select a larger weight.
SELECT TEMP • Fresh Food temperature control is set at warmest setting.
FEATURE ON This is normal. In order to minimize energy usage, the Select Temp
CLIMATE CONTROL feature is disabled when the Fresh Food control is set at the warmest
DRAWER IS NOT setting.
WORKING
CLIMATE CONTROL • Control Lock feature is active. Press and hold the CONTROL LOCK
DRAWER CONTROLS pad on the Climate Control drawer for 3 seconds.
DO NOT WORK
FOOD IS NOT
THAWING/CHILLING
IN CLIMATE
CONTROL DRAWER