Temperature controls, Changing display temperatures from °f to °c, Door alarm – GE ZICP360NXLH User Manual

Page 8: 2shudwlqj,qvwuxfwlrqv

Advertising
background image

8

Temperature

controls

The temperature display shows the actual
temperature of the freezer and fresh food
compartments.
The actual temperature will vary
from the set temperature based on factors such
as frequency of door opening, amount of food,
defrost cycling and room temperature.
NOTE: Frequent door openings or door left open
for periods of time may increase the internal
temperature of the freezer and fresh food
compartments temporarily.
To turn off the cooling system in both the
freezer and fresh food compartments, press
either + pad until both displays show OFF.
To turn the cooling system on, press either
– pad. The preset temperatures of 0°F and 37°F
will appear in the display.

To check the current temperature setting for
the fresh food or freezer compartment,
press
the + or – pad once. After 5 seconds, the display
will return to the actual temperature.
To change the temperature settings, press
the + or – pads to desired temperature set point
for fresh food and freezer separately. Allow
24 hours for the refrigerator to reach the
temperature you have set.

Temperature Ranges

Low

High

Fresh Food

Freezer

NOTE:
Setting the controls to OFF stops cooling,
but does not shut off electrical power to the
refrigerator.

Changing

display

temperatures

from °F to °C

To change the temperature display between
Fahrenheit and Celsius, press the Temp
Display °C/°F.

Door

alarm

To turn the Door Alarm feature on, press
the pad once. The ACTIVE light will come on.
To turn it off, press the pad again.

When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the door
open for more than
2 minutes.

Preset Settings

Allow 24 hours to reach these preset temperatures.

34°F

1°C

–6°F

–21°C

46°F

7°C

+6°F

–14°C

2SHUDWLQJ,QVWUXFWLRQV

Bottom Freezer Refrigerator

Advertising
This manual is related to the following products: