GE ZDT870SIFII - Manual (Page 9)

Cycle Indicator Lights and Sounds
Cycle Sanitized Displayed at end of the cycle when Sanitize Temp has been selected and the
dishwasher has met requirements for sanitization. See Sanitize Temp, for complete
description.
Cycle Complete Displayed when a wash cycle is complete.
Low Rinse Aid Displayed when rinse agent is low or empty. See page 10 for Use a Rinse Agent. To turn
indicator off, press the Pre-Soak button 7 times within 5 seconds. Repeat this process to
turn the Low Rinse Aid indicator back on.
Cycle Status The indicator light on the door front will change color to indicate the wash status. During the
wash cycle, the indicator light will be amber. When the wash cycle is complete, the light will
change to green.
Sounds The dishwasher will emit a sound to indicate cycle completion, button presses, and door
ajar. To mute all sounds, press the Dry Options button 7 times within 5 seconds. Repeat this
process to turn sounds back on.
Door Wake To turn this option ON/OFF, press and hold the START and WASH TEMP buttons for
Up Mode 5 seconds. In the OFF mode, the control display, control sounds, and interior lights
(on some models) will not respond to the door opening/closing. This mode can be
used when observing certain religious holidays such as the Sabbath. To activate
the control and interior lights, press any button.
9
Start Dishwasher
Start Open door to select the desired options. Press the START button and close the
door within 10 seconds to start the cycle or begin the Delay Hours countdown.
The wash cycle will begin shortly after closing the door. The display will turn off if
the door remains open for two minutes. To activate the display, close and open the
door or press any button.
Interrupt To interrupt or pause a dish cycle, slowly open the door. Opening the door will
or Pause cause the wash cycle to pause. The dishwasher will beep every minute to remind
you to close the door. To restart or resume the cycle, press START, and close the
door within 10 seconds.
Cancel To cancel a wash cycle, press and hold the START button for 3 seconds and close
door. The dishwasher will drain, emit a beep sound, and the wash cycle light will
turn OFF.
Dishwasher
Control Panel/Operation
6
7