ATEN CV-130 - Manual

Introduction
CV130 is an interface converter that translate the PS/2
keyboard, mouse and monitor signals to regular SUN
workstation's keyboard, mouse and monitor signals.
Features
• Support Hot plug for PS/2 keyboard and mouse.
• Selectable mouse speed
• With Dip switch(#1,2,3) to select display mode
• With DIP switch(#4,5,6) to select screen saver mode
• No power adapter needed
CV130 fully supports ATEN's existing MasterView KVM switches
and console extender products.
When used with a KVM switch, you may control IBM PS/2 PCs,
Mac computers and Sun Stations from one keyboard, mouse
and monitor.
You may also use CV130 with ATEN's console extender which
will allow you to control your Sun work station from a remote
keyboard, mouse and monitor.
Examples :
The following products that can be used a CV130 to expand
the usage. Contact your dealer for more information.
• CS104 • CS122 • CS1016 •
• CS1008 • CS221 • CE120 •
Dip switch settings
CV-130
MD6 MD6 HD15
Multisync Monitor
Keyboard
PS/2 Mouse
SUN Station
LED
DIP SW
SUN Station MAC
1 2 3 4 POEWR
CPU SWITCH
CS-104 READY
Multisync Monitor
Keyboard PS/2 Mouse
PC
CV-160 CV-130
Installation
1. PS/2 mouse to the PS/2 mouse port and the PS/2
keyboard to the PS/2 keyboard port on CV130. Connect the
monitor to the HD-15 female port of the CV130.
2. Use a 13W3 male-to-male cable to connect the Sun
workstation's video-out port to CV130's Video-in port.
3. Use a MD8 male to male and PIN to PIN Cable to
connect the SUN Workstation's keyboard and mouse port to
CV-130's keyboard and mouse port.
Examples :
CV-130
50mA(max)
13W3 / Female
HD15 / Female
Mini Din 8 Pin / Female
Mini Din 6-pin / Female
Mini Din 6-pin / Female
8 bits
5 º C ~ 40 º C
-20 º C ~ 60 º C
0% ~ 80% (RH)
Plastic
150g
100 x 80 x 36 (mm)
FUNCTION
Power Consumption
Video in Connector
Video Out Connector
Sun Keyboard &
Mouse Connector
PS/2 Keyboard Connector
PS/2 Mouse Connector
DIP Switch
LED
Operation Temperature
Stock Temperature
Humidity
Enclosure
Weight
Dimension (L x W x H)
Specifications
Examples :
SUN Station
CV-130
2L-1001P
CE-120
2L-1010P
2L-1020P
Remoto
Devices
CE-120 application
SW4
OFF
OFF
OFF
OFF
ON
SW5
ON
OFF
ON
OFF
X
SW6
ON
ON
OFF
OFF
X
DIP Switch Setting Monitor
Time Out
5 minutes
10 minutes
20 minutes
30 minutes
Always ON
SW7
ON
OFF
Mouse Speed
Hi
Normal
2. Use switch #4, #5 and
#6 to select the screen
saver timeout. See the
following table for more
information
3. Use switch #7 to select
mouse speed. See the
following table for more
information
1. Use Switch #1, #2 and
#3 to select the video
mode. See the following
table for more information.
13W3 m/m
SW1
ON
ON
OFF
ON
OFF
SW2
OFF
ON
OFF
OFF
ON
SW3
OFF
OFF
ON
ON
ON
DIP Switch Setting Monitor
Resolution
1152 x 900 (76Hz)
1152 x 900 (76Hz)
1152 x 900 (66Hz)
1280 x 1024 (76Hz)
1600 x 1280 (76Hz)
CS-104 application
Active Green
Extend Yellow
Compose Yellow
MD8 m/m