Zif_zir360nx_panel_dim – GE ZIRS360NXLH User Manual
Page 5
102
Custom panel dimensions
All-refrigerator, all-freezer 1/4" framed panel
If you chose to install framed panels, they must be cut to the
dimensions shown. The panels will slide into the frame on the
door and grille.
If the panel is less than 1/4" thick, it must be backed up with
filler material or foam tape to improve the fit.
All-refrigerator, all-freezer 3/4" overlay panel
Overlay panels may be installed on trimmed units.
The overlay panel must be secured to a 1/4"-thick backer
panel which slides into the trim. A spacer panel 0.10" thick
must be placed between the custom and backer panel.
Assemble overlay panels with glue and screws:
• Center spacer panel on the backer panel left to right and
top to bottom. Secure the panels with glue.
• Center the spacer/backer panel on the overlay panel and
secure with glue and screws. Screws must be countersunk
into the backer panel. Note: Left-to-right offset is not
always equal to top-to-bottom offset.
1/4" framed panel dimensions
A (width)
B (grille height) C (door height)
Framed panel
33-7/8"
8-7/8"
69-5/16"
729Dia84
1/4"
Panel
Door/Drawer
5/16"
Trim
Reveal
Door
Panel
zif_zir360nx_panel_dim
C
A
B
Grille Panel
Advance planning for built-in custom all-refrigerators and all-freezers
ImPOrTANT NOTE:
Maximum weight
for the door panel
is 67 pounds.
Maximum total
weight for the
assembled grille
panel is 11 pounds.
3/4" overlay panel dimensions
A (width)
B (grille height) C (door height)
1/4" backer panel 33-7/8"
8-7/8"
69-5/16"
0.10" spacer panel 32-1/2"
7-5/8"
67-15/16"
3/4" overlay panel 34-1/8"
9"
69-9/16"
729Dia42
Overlay
Panel
1/4"
Backer
Panel
Door/Drawer
.10 Inch
Spacer
194Dia65
Spacer Panel
Overlay Panel
Backer Panel
ZUG2 grille panel dimensions
The ZUG2 unified grille panel kit provides for the
installation of a framed or overlay grille panel.
729Dia85
A
B
Grille Panel
Panel dimensions
A (width)
B (grille height)
1/4" framed panel
69-7/8"
8-7/8"
3/4" overlay panel dimensions
A (width)
B (grille height)
1/4" backer panel
69-7/8"
8-7/8"
0.10" spacer panel
68-1/2"
7-5/8"
3/4" overlay panel
70-1/8"
9"
ImPOrTANT: Grille panel maximum total weight is 25 lbs.