Setting up tv – ATI Technologies 137-40188-60 User Manual
Page 13
Using Your ATI Multimedia Center 13
Setting up TV
The first time you start TV, you must complete the Initialization
Wizard. After that, the Wizard will not run unless you want to
re-run it in order to change settings. The Initialization Wizard
guides you quickly and easily through setting up TV channels,
Parental Control, Sound, and TV-on-Demand.
Initialization Wizard
Click the Setup button, then click the Display tab.
Click the Initialization Wizard... button. The TV Channels
Initialization Wizard appears. Follow the Wizard’s instructions
to select cable or antenna, choose the broadcast standard, and to
scan for active channels.
• If you have TV Listings installed with its current database, it
will also add the channel name for each channel. For more
information see
.
Click Next >. The TV Parental Control Initialization Wizard
appears. Follow the Wizard’s instructions to set or change your
Parental Control password.
Click Next >. The Sound Initialization Wizard appears. Follow
the Wizard’s instructions to set up your audio connection.
• If you do not hear TV audio, ensure that the TV is tuned to a
broadcasting channel, and that you have made the correct
audio connections. See
Troubleshooting
on page 87 for more
information.
Note
•
If you have a Video-In card, only the Sound
Initialization Wizard is used.
•
TV-on-Demand is only available if your card
supports it.
Note
•
Passwords are optional.
•
Passwords are case-sensitive, and must be at
least three characters in length.
•
If you forget your password, you will have to
uninstall and reinstall your TV software.