GE ZSC1001KSS - Manual (Page 8)

8
Installation
• Align bottom trim tabs to slots in the bottom of the
oven.
• Secure the bottom trim to the bottom of the oven
using 3 brass screws provided.
SLIDE THE OVEN INTO
THE CUTOUT
CAUTION: Two people are required to lift the oven
into the opening. Grasp the bottom at the front and
rear. DO NOT USE THE HANDLE TO LIFT THE OVEN.
DAMAGE WILL OCCUR!
MISE EN GARDE : Deux personnes sont nécessaires
pour soulever le four et l’insérer dans l’ouverture.
Saisissez-le par le dessous, à l’avant et à l’arrière.
N’UTILISEZ PAS LA POIGNÉE POUR SOULEVER LE
FOUR. DES DOMMAGES SE PRODUIRONT !
• Lift and hold the oven at the front of the opening.
Hold the oven at a 45º angle and plug in the power
cord.
• Carefully, slide the oven into the cabinet part way.
Leave the oven a few inches forward of the cabinet
frame.
• Check to be sure the power cord is not trapped
under the oven or along the sides of the oven.
STEP 1 INSTALL BOTTOM TRIM STEP 2