GE ZFSB25DXSS - Manual (Page 10)

10
CustomCool ™
Stainless Steel Refrigerator
How it works The CustomCool feature is a system of
dampers, a fan, a temperature thermistor
and a heater. Depending on the function selected,
a combination of these will be
used to quickly chill items, thaw items or
hold the pan at a specific temperature. The pan is tightly sealed to prevent the pan’s
temperature from causing temperature
fluctuations in the rest of the refrigerator.
The controls for this pan are located at the
top of the fresh food compartment with the
temperature controls.
How to use 1 Empty the pan. Place the Chill/Thaw tray
in the pan. Place the items on the tray and
close the pan completely.
2 Select the ExpressThaw ™ , ExpressChill ™
or SelectTemp ™ pad. The display and SET
light will come on. Tap the pad until the light
appears next to the desired setting. Use the
chart to determine the best setting to use.
• To stop a feature before it is finished, tap that
feature’s pad until no options are selected and
the display is off.
• During ExpressThaw and ExpressChill,
the display on the controls will count down the
time in the cycle.
• After the ExpressThaw cycle is complete,
the pan will reset to the MEAT setting (31°F) to
help preserve thawed items until they
are used.
• The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage and
operating environment.
NOTE: For food safety reasons, it is recommended
that foods be wrapped in plastic wrap when using
ExpressThaw. This will help contain meat juices
and improve thawing performance.
ExpressThaw ™
ExpressChill ™