GE ZV48RSFSS User Manual

Dimensions and specifications (in inches), Installation clearances

Advertising

Specification Revised 6/11

130640

zv48RSfSS – GE Monogram 48" Stainless Steel Professional Hood

Dimensions and Specifications (in inches)

For answers to your Monogram,

GE Profile

™

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center

service, 800.626.2000.

Listed by

Underwriters

Laboratories

Model ZV48R

47-15/16"

25"

12"

22-1/2"

Each hood is shipped with a stainless steel backguard and

a warming shelf. Hoods may be installed with the shelf or

backguard alone, or with both as shown.

Installation Clearances

These vent hoods are designed to be installed onto a wall or beneath a

soffit or cabinet.
Installation with Warming Shelf
• Hoods must be installed 32" Min., 38" Max. over any type cooking

surface when warming shelf is used.

Installation without Warming Shelf
• Install these hoods 30" Min. to 36" Max. above the cooking surface

when installed over any professional style cooktop or range.

• These hoods may be installed 24" min. above a gas or electric

drop-in style cooktop.

Note: Clearances may vary due to type of cooking product and local

codes. Check with local inspectors to be sure standard is applicable.

Soffit Installation

Warming

Shelf

Backguar

SOFFIT

32" Min.

38" Max.

30" Min.

36" Max.

Install these hoods 30" Min. to

36" Max. over a professional

style cooktop or range.

Allow 32" Min. and 38" Max.

clearance above any cooking

surface when installed with shelf.

In this installation the ductwork running from the top of the hood will

be concealed in the soffit or upper cabinetry.

Wall Mount Installation