Avenview SPLIT-HDSDI-4-RS - Manual (Page 5)

www.avenview.com 5
1.7 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.
1.8 Panel Description
FRONT PANEL
1. HD/SD-SDI Input 2. LED – Reserved
3. LED – Power Indicator 4. 5V DC Power Jack
REAR PANEL
5. HD/SD-SDI Output 1 6. HD/SD-SDI Output 2
7. HD/SD-SDI Output 3 8. HD/SD-SDI Output 4