GE 20622 GE Universal Remote - Manual (Page 6)

6
Device Device stored Code
TV TV
DVD
CBL/SAT
VCR/AUX
Direct Code Entry
1. Press and hold the SETUP button until the red
indicator stays on, then release the SETUP button.
2. Press and release the desired device button ( TV,
DVR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables (on
separate sheet). Note: after a valid code entry, the
red indicator turns off. For an invalid
code, the red indicator flashes.
4. With your device on, press ON•OFF .
If the device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other codes
for your brand.
Write your codes down here for easy reference later.