GE 45146 GE Choice Alert Wireless Keypad - Manual (Page 15)

14 15
Step 1. Remove battery.
Step 2. Press and hold both the panic (RED) button
and the Disarm (GREEN) button at the same time.
Step 3. While pressing both the buttons, reinsert the
battery. The LED will flash rapidly for a short time and
willl then flash slowly. Release the buttons.
It will take approximately four hours for the reset to
complete.
WARNING!
Risk of personal injury
- Prolonged exposure to alarm
siren may cause permanent
hearing loss
Battery Warnings!
- Remove batteries before storing
the Alarm or Sensor for extended periods
- Batteries may leak harmful liquids or
ignitable materials or explode causing injury
and product damage
- Do not mix old and new or other battery types
- Replace all batteries at the same time
- Replace fully discharged batteries immediately