AMX UDM-0102 - Manual (Page 29)

UDM-RX02 Wiring and Connections
17 UDM-0102 and UDM-RX02 Operation/Reference Guide
AUDIO Connectors
The UDM-RX02 provides standard Audio RCA output connectors for S/PDIF for digital audio, and
LEFT/RIGHT for analog audio output (see FIG. 12 on page 15).
VIDEO Connectors
VGA Connector (HD15)
FIG. 13 provides the pin layout for the VGA connector:
Refer to VIDEO IN Connectors (HD15) section on page 9 for pinout details.
Connecting a VGA Video Input
1. Attach one end of the Endeleo VGA to VGA cable to the VGA connector on the UDM-RX02 (see
FIG. 12 on page 15).
2. Run the other end to the VGA connector on the display device. Connect firmly.
3. If appropriate connect audio to the audio connectors on the UDM-RX02.
Connecting a Composite Video Input
1. Attach the composite cable (normally yellow) to the CVBS connector on the UDM-RX02 (see
FIG. 12 on page 15).
2. Run the other end of the composite cable to the Composite connector (normally yellow) on the
display device. Connect firmly.
3. If appropriate connect audio to the audio connectors on the UDM-RX02.
Connecting an S-Video Input
1. Attach the SVideo cable to the S-VIDEO connector on the UDM-RX02 (see FIG. 12 on page 15).
2. Run the other end of the SVideo cable to the SVideo connector on the display device. Connect
firmly.
3. If appropriate connect audio to the audio connectors on the UDM-RX02.
FIG. 13 VGA (HD15) Connector
1 2 3 4 5
6 7 8 9 1
11 12 13 14 15
Ensure Input A is configured as a “VGA Input” and named appropriately within the
“Inputs” section of the Hub’s Configuration software. Also ensure the correct Audio
Type (Analog L/R or S/PDIF) is selected for the relevant input.
FIG. 14 S-Video Pinouts
1 2
3 4
1 2
3 4
Input Pin
1
2
3
4
VGA
Ground Y
Ground C
Chrominance (Color)
Luminance (Intensity)