Issuing ir commands to centrally located devices – AMX UDM-0102 User Manual
Page 39
Configuration
27
UDM-0102 and UDM-RX02 Operation/Reference Guide
Issuing IR Commands to Centrally Located Devices
It is also possible to control centrally located hardware such as DVD players, via options on the Devices
page. Remember that an IR01 IR Emitter Module from the UDM-0102 sits over the device’s IR sensor.
1.
Select the Devices option from the available options at the top of the Status page to invoke the
Device Control options, as shown in FIG. 28.
2.
Click the down-arrow to access the Controls drop-down menu, and select the IR command that you
wish to send.
The IR command is sent as soon as it is selected.
The Execute button re-sends the selected IR command.
FIG. 28
Controls Available for a Centrally Located Device
Controls available for Device 1
Execute button (Device 1)
Execute button (Device 2)
The device’s commands must have been learned by the UDM hub in order to
function. Refer to the Protocols and IR Learning section on page 49 for details.