AMX UDM-0102 - Manual (Page 50)

Configuration
38 UDM-0102 and UDM-RX02 Operation/Reference Guide
To Issue a Custom Control
1. Select Custom in the Control drop-down menu (FIG. 45).
2. Type in the value of the IR code which is to be sent in the relevant box.
3. Execute the custom control or schedule it to occur later.
Setup Page
Click the Setup link on the left side of the WebConsole to invoke the main Setup page (FIG. 46). Use the
options on this page to configure the Hub for the network environment.
FIG. 45 Custom Control selected
FIG. 46 Setup Page
Enter the value of the desired custom IR code here