AMX UDM-0102 - Manual (Page 64)

Protocols and IR Learning
52 UDM-0102 and UDM-RX02 Operation/Reference Guide
5. Enter a name for the IR protocol in the Name text field (FIG. 73).
6. Click Initialize. This invokes the Action drop-down menu (FIG. 74).
7. Select an action to be performed from the Action drop-down menu. This invokes the Step 1 option
(FIG. 75).
8. Click Step 1 to ready the device to receive the IR code (the system prompts you to press the desired
key on the remote control).
9. Press the corresponding button on the remote.
10. Click Step 2 on the page to begin the IR code confirmation.
11. Press the corresponding button on the remote again. The IR code has now been added and assigned
an action.
The UDM-0102 can learn a maximum of 128 IR commands depending on the actual command length
and protocol used.
FIG. 73 Naming the new IR Protocol
FIG. 74 Creating an IR command for the action
FIG. 75 Creating an IR command for the action
Click here to prepare the device to
receive the IR code