Asus M3A78 - Manual (Page 50)

2-14 ASUS M3A78
ECC Configuration
ECC Mode [Disabled]
Enables or disables the DRAM ECC that allows the hardware to report and correct
memory errors automatically. Configuration options: [Disabled] [Basic] [Good] [Super]
[Max] [User]
Alternate VID [Auto]
Specifies the alternate VID while in low power states. Configuration options: [1.150V]
[1.125V] [1.100V] [1.075V] [1.050V] [1.025V] [1.000V] [0.975V] [0.950V] [0.925V] [0.900V]
[0.875V] [0.850V] [0.825V] [0.800V] [Auto]
Primary Display Adapter [GFX-GPP-PCI]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [GFX-GPP-PCI] [GPP-GFX-PCI] [PCI-GFX-GPP]
2.4.4 Onboard Devices Configuration
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP]
[EPP+ECP]
Parallel Port IRQ [IRQ7]
Allows you to set the Parallel Port IRQ. Configuration options: [IRQ5] [IRQ7]
HDAudio Controller [Enabled]
Allows you to enable or disable the HD Audio Controller.
Configuration options: [Disabled] [Enabled]
Front Panel Select [HD Audio]
Allows you to set the HD audio mode. Configuration options: [AC97] [HD Audio]
Onboard LAN Controller [Enabled]
Allows you to enable or disable the Onboard LAN. Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the Onboard LAN Boot ROM. Configuration options:
[Enabled] [Disabled]