AVTEQ Adjustable Universal Mount (UM-1, UM-1T, UM-2) - Manual (Page 3)

2
3
4
L
L
M/N
NOTE:
When attaching the mounting
screws to the display, make
sure the direction of Brackets
is right and ensure that both
brackets are vertically aligned
Recessed mounting
holes.
If the mounting holes
are recessed into the
back of the display, use
the supplied spacers to
pack the recessed hole.
MOUNTING THE DISPLAY
BRACKETS
ATTACHING THE DISPLAY TO
THE WALL PLATE
SECURITY OPTION
Note: This procedure will require two persons
With the Brackets attached
to the display, lift the
display and hook the
brackets onto the Wall Plate
as shown.
Note: For demonstration purposes, the wall
has been omitted from the above images.
Note: For demonstration purposes, the wall has been
omitted from the above Images.

Can be adjusted freely 
Mounting screw
BACK OF
DISPLAY