STEINEL RC4 - Manual

Functions
Dimming function
The RC4 r emote enables the user to
dim up or down to desired levels when
used with the Control Pro DIM-24
sensors and 0-10 volt dimming bal
lasts. The last light level adjustment
setting is saved and will return after
being switched ‘OFF’ and then back
‘ON’ again by the RC 4, switch or
presence detection.
Light ‘ON’/ ‘OFF’
The ON/OFF remote feature allows the
occupant to conveniently turn lighting
OFF and ON again such as needed dur-
ing video or presentation viewing.
Controls only lighting and does not ef-
fect HVAC outputs of the COM2-24. The
ON/OFF function works with all of the
Control Pro sensors.
Reset
Returns settings to those selected
manually on the detector or to the fa-
tory setting (only applies to settings
that can be changed by remote con-
trol)
www.steinel.net (800) 852-4343 www.steinel.net (800) 852-4343
RC4
RC 4 Service Remote
Description
The RC 4 user remote control gives the
occupant the ability to turn lighting ‘ON’
or ‘OFF’ with the entire line of Control Pro
sensors via remote control. The dimming
functions are only available with the DIM-
24 sensors. Each valid press of a button
is indicated by a blue LED flash on the
sensor. 1
2
3
1
2
3