Ag Leader Versa DirectCommand Injection Quick Reference Guides User Manual
Directcommand, Direct injection
Advertising
DirectCommand
TM
Direct Injection
PN 206311 Rev A
1
Controller Settings screen
Pump Calibration
Factory Calibration
number found on pump speed sensor, pulses/10
fluid ounces, divide by 10 and enter number, once
entered, number should not be changed
Perform Calibration
pump will not run until calibrated, calibrate at
beginning of season and when repairs are made
Rate Response Warning
Error Threshold and Error Delay
duration and error allowed before alarm is
displayed
Flow Monitor Warning
Error Threshold
percentage of perceived application error allowed
before displaying flow sensor warnings
Enable Warning
option of displaying Flow Monitor Warning
Create Configuration
Enter Settings
There is a tab for each pump
Start of Configuration wizard
Advertising
This manual is related to the following products: