Avenview DVI-GS3-2 - Manual (Page 11)

www.avenview.com 11
Step 2: Switch Basic Operation
a. Auto Switching: GameSwitch will switch to the first device activated. If you turn off one
of the displayed sources, it will automatically switch to the other active channel.
b. Optional Power Adapter: If your PC doesn’t have USB port or the USB power is not
sufficient for GameSwitch, you may use optional DC 5V, 2A power adapter with USB
type A output port.
Figure 8: Optional Power Adapter
General Troubleshooting
Problem Possible Solution
Screen Defects Appear

Check that DVI resolution and frequency is not over the limit
of monitor display.

Check your current resolution, refresh rate and color depth
settings in the Settings and Monitor tabs in your Display
Properties dialog.
Off-Center Screen Image, Odd
Colors or No Picture

Try adjusting the brightness, sharpness, contrast, and color
balance controls of your monitor.

Try adjusting the centering and positioning controls of your
monitor to position the picture on the screen.
No Image

For first timing installation ensure to reset the game console
to factory default

Ensure that the monitor cable is securely fastened to the DVI
and Monitor port.

Check to see if your DVI monitor supports desired resolution

Check if the GameSwitch is getting sufficient power.