Ag Leader GPS 1500 Operators Manual - Manual (Page 7)

9. When setup is complete, press on the Exit button, which is the
red X
located in the right-hand corner of the window.
10. The Exit Options window appears, asking you to
choose one of the following options. Always press Exit and
Save.
Exit Options window
Note: If you choose a selection other than Exit and Save, your settings will not be saved.
11.A series of messages appears, after which a Configuration
Report will appear. At the configuration report, you can view your
saved settings. However, you cannot make changes to these
settings at this window
12.Press Close to end the utility program
New Receiver Configuration Report
5