Ag Leader GPS 1100 Operators Manual - Manual

Please Read
First!
The GPS 1100 default configuration of 4800 1Hz is set to work with all Ag
Leader monitors (YM2000, PF3000/3000Pro/Advantage and Insight.) If the
intended use of the GPS 1100 is for Direct Command application, it needs to
be configured to output 4hz. This configuration will allow the GPS 1100 to
output four positions per second using GGA and VTG NMEA messages.
Instructions for configuring the GPS 1100 can be found on page 8 of the
manual.