Ag Leader SMS Basic and SMS Advanced Getting Started Guide - Manual (Page 41)

SMS Getting Started
Revision 7/28/2014
© 2014 Ag Leader Technology, Inc All Rights Reserved 40
a. At the top of the screen all of the Analysis Results that you defined in the first
setup step will be displayed. When building and modifying the equation, select
the appropriate analysis to work with by left clicking on the name before
making changes.
b. The Comment Box allows you to type in notes that will be displayed in the
equation window. This is useful if you need to define any conversion rates or
other constants you are using in your equation.
c. On the far right hand side of the screen you will see the Editing Tools.
i. With any data selected in the equation definition box click the Delete
icon to remove it from the equation.
ii. Use the Cut button to remove the selected items from the equation,
where they will be copied to a clipboard for you to paste at a later time.
iii. The Copy button will copy whatever is currently selected in the equation
definition tab.
iv. Clicking the Paste button will add the data that was previously cut or
copied into the current cursor location in the equation definition window.
v. After deleting or cutting data you can click on the Undo button to reverse
the change.
vi. To reapply a change that you previously undid using the Undo button
click the Redo button.
d. The center of the Define Result Equations dialog displays the equation as you
have built it.