APC AP9268 - Manual (Page 39)

APC KVM Switch Installer/User Guide
34
7.3 FLASH Upgrading
To upgrade the FLASH code on your APC KVM Switch, you will fi rst need
to obtain the latest FLASH fi rmware revision from APC. It is available
online at www.apc.com.
Next you will need a serial cable (available at most electronics stores)
to connect a computer to your APC KVM Switch. Simply connect the
serial cable between the SETUP port on your APC KVM Switch to the
serial port on the computer.
You will then need some form of terminal software on your attached computer
so that it can communicate with the APC KVM Switch. There are several that
are commercially available. Select one that you are comfortable with and be
sure that it can communicate at 38,400 baud.