BMR Suspension BK018 - Manual

FRONT LOWER CONTROL ARM BUSHINGS (BK018)
Required Tools:
• Hydraulic jack and 2 stands (lift optional but recommended)
• Wrenches – 18mm
• Sockets – 18mm, 21mm
• Pry-bar
• Brass hammer
Installation:
1. Lift vehicle and support with
stands under the rocker jack points
or K-member.
2. Remove both front wheels/tires.
3. Using an 18mm socket and
wrench, remove the inner
mounting bolt on the lower control
arm. See Image 1 to the right.
4. Using a 21mm socket, remove the outer ball
joint nut. See Image 2 to the right.
5. Knock the ball joint loose from the spindle
using a brass hammer.
6. Remove the control arm.
Continued
1