BMR Suspension BK026 - Manual

Differential Mount Bushings – Pontiac G8 and 2010-present Camaro
BK026
Required Tools:
Hydraulic jack and 2 stands (lift optional but recommended)
Wrenches – 18mm, 21mm
Sockets – 10mm, 13mm, 18mm, 21mm
Pry-bar
Drill with 2” hole saw
Installation:
1. Lift vehicle and support with stands
under the rocker jack points shown in
Image 1.
2. Remove both rear wheels.
3. Using a 15mm socket, remove the driveshaft tunnel brace. See Image 2.
4. Unplug the rear O2 sensors as shown in Image 3.
1