Atech Flash Technology PRO-GEAR XP-14 - Manual (Page 4)

Installation
3
Simply plug the USB cable into the back of the XP-14 and plug the other end
to any open USB port of your computer.
This is a USB 2.0 device and it is backward compatible with USB 1.1 interface.
However, USB 1.1 performance can only be expected when connected to
a USB 1.1. port.
When the unit is connected to a USB 1.1 port, the following Windows message may appear:
"A HI-SPEED USB device is plugged into a non-HI-SPEED USB hub.
For assistance in solving this problem, click this message"
Please ignore the message.
Windows 98SE or Windows 2000 users:
Driver installation is required. Please perform software setup first before using
the PRO-Gear XP-14.