BMR Suspension TB002 - Manual

BMR THROTTLE BODY BYPASS KIT
Part # TB001 and TB002
INSTALLATION:
1. Using a flathead screwdriver, remove the air intake tube connecting the throttle
body to the mass airflow meter to expose the work area.
2. Locate the water line going into the bottom of the throttle body and loosen the
hose clamps.
3. Remove both hoses from the throttle body and cap the openings with the provided
clamps.
4. Slide the OE hoses over the supplied BMR bypass adapter and clamp into place
(new clamps are provided with kit).
5. Re-install the air intake hose.
WWW.BMRSUSPENSION.COM
This product is an aftermarket accessory and not designed by the vehicles manufacturer for use on this
vehicle. As such, buyer assumes all risk of any damage caused to the vehicle/person during installation or
use of this product.
BMR THROTTLE BODY BYPASS KIT
Part # TB001 and TB002
INSTALLATION:
6. Using a flathead screwdriver, remove the air intake tube connecting the throttle
body to the mass airflow meter to expose the work area.
7. Locate the water line going into the bottom of the throttle body and loosen the
hose clamps.
8. Remove both hoses from the throttle body and cap the openings with the provided
clamps.
9. Slide the OE hoses over the supplied BMR bypass adapter and clamp into place
(new clamps are provided with kit).
10. Re-install the air intake hose.
WWW.BMRSUSPENSION.COM
This product is an aftermarket accessory and not designed by the vehicles manufacturer for use on this
vehicle. As such, buyer assumes all risk of any damage caused to the vehicle/person during installation or
use of this product.