BMR Suspension BK002 User Manual
Rear cradle bushings bk002
Advertising
Rear Cradle Bushings
BK002
Required Tools:
Hydraulic jack and 2 stands (lift optional but recommended)
Wrenches – 18mm, 21mm
Sockets – 10mm, 13mm, 18mm, 21mm
Pry-bar
Installation:
1. Lift vehicle and support with stands under the rocker jack points shown in Image 1.
2. Remove both rear wheels.
3. Using a 15mm socket, remove the driveshaft tunnel
brace. Image 2.
4. Unplug the rear O2 sensors as shown in Image 3.
5. Using a 13mm socket, remove the two bolts
that hold the rear two muffler brackets in
place. Remove 4 bolts total, 2 per side. See Image 4.
1
Advertising