Boonton 4240 RF Power Meter - Manual (Page 101)

Boonton 4240 Series RF Power Meter
Table 5-1. SCPI COMMAND SUMMARY (continued)
STATus:QUEStionable:CALibration:EVENt? Ret
urn value of the questionable calibration event register
gative transition filter
ositive transition filter
/return keypad audible beeper status.
oolean> = 0, 1, OFF, ON
Causes a beep to be emitted. No argument. No return.
Set or return the GPIB bus address.
meric value> = 1 to 30
return the GPIB Listen end-of-string terminator.
r data> = LF, CR, CRLF, EOIONLY
Set/return the GPIB Talk end-of-string terminator.
<character data> = LF, CR, CRLF, EOIONLY
Tem OMM nicate:SERial:B e RS232 baud rate.
alue> = 300, 600, 1200, 2400, 4800, 9600, 19200,
em OMM nicate:S Rial:B S232 serial Data Bits.
<numeric val e> = 7,8
t/return the RS232 serial Stop Bits.
ue> = 1,2
error code and description
Return the number of errors in the queue
t instrument to default conditions.
:VERSion? Return SCPI version compliance.
<numeric value> = yyyy.v
INSTrument:VERSion:FIRMware? Returns the firmware revision code.
<numeric value> = yyyymmdd
STrument:VERSion:FPGA? Returns the FPGA revision code.
<numeric value> = MM.mm
STATus:QUEStionable:CALibration:NTRansition Set/return the ne
STATus:QUEStionable:CALibration:PTRansition Set/return the p
SYSTem:BEEP[:ENABle]
Set
<B
SYSTem:BEEP:IMMediate
SYSTem:COMMunicate:GPIB:ADDRess
<nu
SYSTem:COMMunicate:GPIB:EOI Set/return the status of the GPIB EOI.
<Boolean> = 0, 1, OFF, ON
SYSTem:COMMunicate:GPIB:LISTen Set/
<characte
SYSTem:COMMunicate:GPIB:TALK
SYS
:C u AUD Set/return th
<numeric v
38400, 57600, 115200
SYST
:C u E ITS Set/return the R
u
SYSTem:COMMunicate:SERial:PARity
Set/return the RS232 Parity.
<character data> = ODD, EVEN, NONE
SYSTem:COMMunicate:SERial:SBITS Se
<numeric val
SYSTem:ERRor[:NEXT]?
Return system
SYSTem:ERRor:CODE?
Return system error code
SYSTem:ERRor:COUNt?
SYSTem:PRESet
Se
SYSTem
IN
Remote Operation
5-41