Installing boonton power analyzer suite software, 55 series wideband usb sensor – Boonton The New 55 Series Wideband USB Power Sensor User Manual
Page 6
55 Series Wideband USB Sensor
Page 6 of 28
6
Installing Boonton Power Analyzer Suite Software
This section describes the installation and use of Boonton Power Analyzer Suite software for 55 series wideband
USB sensors. Before you start, check your PC for software compatibility.
Caution: Do not connect the power sensor to your PC until you have installed the Boonton Power Analyzer
software.
Procedure:
To install the Boonton Power Analyzer Suite software, follow these steps:
(1) Install Boonton Power Analyzer Suite by selecting
. The installation package can be
downloaded from "Manual & Software" section of the product page on Boonton website:
(2) The Installation process is initiated by running “BoontonLauncher.exe” with admin permissions. When you
select the
for the first time, select "Yes" and then click on "Install" in order to
proceed with the installation process.
(3) Initially Boonton USB driver file will be installed. You might receive a windows security warning message
as below. The USB driver file will be installed once you select the checkbox to accept the windows
security.
(4) Next IVI Shared Components installation wizard will appear as a part of the installation process. This will
allow to install necessary API files for remote communications. Select
to continue the
installation process.