Clinton Electronics CE-LCD5.5 - Manual

Included Items:
• Test Monitor x 1
• Monitor Bag x 1
• Battery Pack x 1
• Battery Charger x 1
• DC12V Power Supply x 1
• BNC to RCA adapter x 1
•Instructions x 1
• Power/Video Adapter Cable x 1
• Shoulder/Neck Strap
Optional Items:
• BNC Jumper
TO MONITOR
1. CONNECT CABLES
Connect the cable from the monitor to the power/video adapter cable. Align the arrows
on the connection ends to ensure proper connection of the pins.
Connect the power lead from the adapter cable to the power source; either the battery
or the DC12V power supply.
BNC.
To attach the BNC end of a camera to the BNC end of the monitor you will need
a BNC (male) to BNC (male) adapter or a BNC Jumper Cable.
To make a BNC Jumper Cable; attach 2 BNC (male) connectors to either ends of a length
of RG59 coax cable.
RCA.
Use the supplied BNC to RCA Adapter if attaching to a camera with a RCA lead.
*Information in this document is subject to change
v.06.26.13
Clinton Electronics
USER GUIDE
2. CONNECT POWER
3. CONNECT VIDEO
TO ADAPTER
CABLE
POWER LEAD
ADAPTER
CABLE
ALIGN
ARROWS
BNC LEAD
FROM
ADAPTER
CABLE
BNC TO RCA
ADAPTER
RCA CABLE
BNC JUMPER CABLE
POWER BUTTON
POWER ‘ON’
POSITION
Battery.
First set the switch on the battery to the ON position (red LED down on
switch). Then press the grey POWER button on the face of the monitor.
DC12V.
Push the grey POWER button on the face of the monitor.
4. POWER ON
POWER BUTTON
TO ADAPTER
CABLE