Clinton Electronics CE-M10S - Manual (Page 17)

17
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down
buttons so that the arrow indicates ‘DAY/NIGHT’.
2. Select a desired mode using the Left and Right buttons according to the picture display you
want.
 EXTERN : This mode allows you to apply a desired filter to external signals.
 COLOR : The picture is always displayed in color.
 B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
 AUTO : The mode is switched to ‘Color’ in a normal
environment, but switches to ‘B/W’ mode when
ambient illumination is low. To set up the switching
time for AUTO mode, press the SET button. You
can turn on or off the burst signal on B/W mode.
– DWELL TIME : You can select the duration time about changing the day/night mode.
(3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s)
Day / Night
Notes
When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between •
Color and Black & White may not occur.
When AGC in the EXPOSURE menu is ‘OFF’, ‘ --- “ mode operates as like selecting ‘COLOR’ mode, •
and ‘AUTO’ mode can not be selected.