Clinton Electronics CE-CG-2x2.612 - Manual

Pg 1
SUSPENDED CEILING BRACKET INSTALLATION
INSTRUCTIONS
Congratulations on the purchase of the Clinton mounting bracket for suspended ceilings.
This bracket has been designed for ease of installation with uncompromised safety. All
cabling is routed through the column for aesthetics. This bracket is to be installed in place
of a standard 2x2 ceiling tile.
Tools Required
#2
Phillips screwdriver
3/8” Wrench
5/16” Wrench
Wire Cutters
Hardware Included
#10-24 x 2-1/4” lg Phillips Pan Head Screw (3)
#10-24 Lock Nut (3)
#10 Flat Washer (6)
M4 x 8mm lg Pan Head Screw (4)
Snap Bushing (2)
Safety Cable (Aircraft Cable) & Cable Clamp
Spool Annealed Safety Wire
Turnbuckles (4)
T-Bar Clips (2)
Bracket Components
Panel, 2x2 Tile
Column, 60” long
LCD Vesa Bracket
Collar, 1-11/16” ID
Plastic Shims (2)
Please check to ensure all hardware and Bracket components are included with this
shipment before starting. If parts are missing, please contact Clinton Electronics’ Service
Department:
Phone: 1-800-549-6393
E-mail:
[email protected]