CMP SS2K/TA - Manual

INSTALLATION INSTRUCTIONS FOR
CMP CABLE GLAND TYPES
SS2K, SS2K/PB & SS2K/TA
CABLE GLAND FOR USE IN HAZARDOUS AREAS WITH UNARMOURED AND BRAID ARMOURED CABLE
(WITH LEAD SHEATH ON “PB” VERSIONS & TAPE ARMOUR WITH “TA” VERSIONS).
INCORPORATING EC DECLARATION OF CONFORMITY TO DIRECTIVE 94/9/EC
CM
P
Do
cu
m
en
tN
o.
FI
43
0
Is
su
e
FI
43
0
Is
su
e
4
01
13
0518
Glasshouse Street • St. Peters • Newcastle upon Tyne • NE6 1BS
Tel: +44 191 265 7411 • Fax: +44 191 265 0581
E-Mail: [email protected] • Web: www.cmp-products.com
Notified Body: Sira Certification Service, Rake Lane, Chester CH4 9JN, England.
I, the undersigned, hereby declare that the equipment referred to herein conforms to the requirements of the ATEX Directive 94/9/EC and the
following standards:-
EN60079-0:2006, EN60079-1:2007, EN60079-7:2007, EN60079-15:2005, BS 6121:1989, EN50262:1998 (Amd 2001), EN61241-0:2004,
EN61241-1:2004
Dr Geof Mood - Technical Director - (Authorised Person)
DUBAI • HOUSTON • NEWCASTLE • SINGAPORE • SHANGHAI • PUSAN • PERTH
www.cmp-products.com
Logo’s shown for illustration purposes only. Please check certification for details
CABLE GLAND TYPES CABLE GLAND TYPES
SS2K, SS2K/PB SS2K, SS2K/PB
& SS2K/TA & SS2K/TA
* Codes shown are for SS2K glands, for SS2K/PB add “PB” e.g. 20SS2KPB1RA, for SS2K/TA add “TA” e.g. 20SS2KTA1RA
** CMP SOLO LSF Halogen Free Shrouds also available for the full range on request.
SS2K - For use with unarmoured
and braid armoured cable
SS2K/PB - For use with
unarmoured and braid armoured
cables with lead sheaths
SS2K/TA - For use with
Tape Armour cable
Cable
Gland
Size
Available Entry Threads
Minimum
Thread
Length
Cable Bedding
Diameter
Overall Cable
Diameter
Across
Flats
Across
Corners Protrusion
Length
Ordering
Reference
(Brass Metric)
*
Shroud
Ref
**
Cable Gland
Weight
(Kgs)
Standard Option
Metric NPT NPT Min Max Min Max Max Max
20S/16 M20 1/2" 3/4" 10.0 3.1 8.7 3.1 8.7 24.0 26.4 42.0 20S16SS2K1RA PVC04 0.072
20S M20 1/2" 3/4" 10.0 6.1 11.7 6.1 11.7 24.0 26.4 42.0 20SSS2K1RA PVC04 0.072
20 M20 1/2" 3/4" 10.0 6.5 14.0 6.5 14.0 27.0 29.7 47.0 20SS2K1RA PVC05 0.079
25 M25 3/4" 1" 10.0 11.1 20.0 11.1 20.0 36.0 39.6 56.0 25SS2K1RA PVC09 0.149
32 M32 1" 1 1/4" 10.0 17.0 26.3 17.0 26.3 41.0 45.1 58.0 32SS2K1RA PVC10 0.170
40 M40 1 1/4" 1 1/2" 15.0 23.5 32.2 22.0 32.2 50.0 55.0 60.0 40SS2K1RA PVC13 0.224
50S M50 1 1/2" 2" 15.0 31.0 38.2 29.5 38.2 55.0 60.5 62.0 50SSS2K1RA PVC14 0.298
50 M50 2" 2 1/2" 15.0 35.6 44.1 35.6 44.1 60.0 66.0 64.0 50SS2K1RA PVC17 0.308
63S M63 2" 2 1/2" 15.0 41.5 50.0 40.1 50.1 70.0 77.0 66.0 63SSS2K1RA PVC20 0.480
63 M63 2 1/2" 3" 15.0 47.2 56.0 47.2 56.0 75.0 82.5 67.0 63SS2K1RA PVC22 0.458
75S M75 2 1/2" 3" 15.0 54.0 62.0 52.8 62.0 79.0 86.9 68.0 75SSS2K1RA PVC24 0.621
75 M75 3" 3 1/2" 15.0 61.1 68.0 59.1 68.0 84.0 92.4 70.0 75SS2K1RA PVC26 0.526
90 M90 3" 3 1/2" 15.0 66.6 80.0 66.6 79.4 108.0 118.8 75.0 90SS2K1RA PVC31 1.795
100 M100 4" - 15.0 76.0 91.0 76.0 91.0 122.0 134.2 81.0 100SS2K1RA PVC32 2.100
115 M115 - - 15.0 86.0 98.0 86.0 98.0 138.0 151.8 85.0 115SS2K1RA LSF34 3.096
130 M130 - - 15.0 97.0 115.0 97.0 115.0 154.0 169.4 92.0 130SS2K1RA LSF35 4.530
Dimensions are displayed in millimetres unless otherwise stated
Ca
bl
e
Gl
an
d
Se
le
ct
io
n
Ta
bl
e
TECHNICAL DATA
CABLE GLAND TYPE : SS2K, SS2K/PB & SS2K/TA
INGRESS PROTECTION : IP66, NEMA 4X
PROCESS CONTROL SYSTEM : BS EN ISO 9001
: ISO/IEC 80079-34:2011
HAZARDOUS AREA CLASSIFICATION
ATEX CERTIFICATION No : SIRA 06ATEX1097X & SIRA 07ATEX4326X
ATEX CERTIFICATION CODE : II 2/3 GD Ex d IIC / Ex e II / Ex nR II / Ex tD A21 IP66 (SS2K/TA is not Ex d IIC)
: I M2 Ex d I / Ex e I (not SS2K/TA)
IEC Ex CERTIFICATION No : IEC Ex SIR.06.0041X
IEC Ex CERTIFICATION CODE : Ex d I / Ex e I / Ex e II / Ex nR II / Ex tD A21 IP66 (Ex e II / Ex nR II / Ex tD A21 IP66 for SS2K/TA)
cCSAus CERTIFICATION No. : 1211841 (SS2K only)
cCSAus CERTIFICATION CODE : Ex d IIC / Ex e
INSTALLATION INSTRUCTIONS
Installation should only be performed by a competent person using the correct tools. Spanners should be used for tightening. Read all instructions before
beginning installation.
SPECIAL CONDITIONS FOR SAFE USE
1. The SS2K, SS2K/PB and SS2K/TA cable gland shall only be used where the temperature at the point of entry is in the range -60°C to +130°C.
2. The SS2K, SS2K/PB and SS2K/TA cable gland are only suitable for fixed installations. Cables must be effectively clamped to prevent pulling or twisting.
3. The entry component threads may need additional sealing to maintain the ingress protection ratings as applicable to the associated equipment to
which it is attached.
4. According to the CEC C22.1-98, Section 18-106 Part 3, Tapered Threads shall have five fully engaged threads and where non-tapered threads are
used in Group IIC there must be eight fully engaged threads.
ACCESSORIES
The following accessories are available from CMP Products, as optional extras, to assist with fixing, sealing and earthing :-
Locknut | Earth Tag | Serrated Washer | Entry Thread (I.P.) Sealing Washer | Shroud **