Cyron Lighting CLS1201-2401 - Manual (Page 5)

Tape:
Place the magnetic pads on the lights. Remove tape liner.
Place the lights in the desired location while paying close attention to
alignment of the lights. Press for 5 seconds. Do not press too firmly on
the plastic lens.
Bracket: DO NOT USE SCREWS FOR FASTENING TO FRAGILE
SURFACES OR ELECTRICAL DEVICES. Mount the brackets using
screws provided. You may also choose other types of hardware that
better suit the mounting surface. Make sure the brackets line up
properly.
Wiring CYRON Under cabinet light is a low voltage system. With
the exception of Power supply input, all other wires are operating at
low voltages to minimize the risk of electrical shocks or fire hazards.
However, working with electrical devices has risks. Consult with