DECO BREEZE Decorative Retro Box Fan - Manual (Page 2)

1. WARNING:To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control
device.
2. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not attempt to defeat this safely feature.
3. Use the fan only for the specific purpose outlined in this instruction information.
4. Do not operate fan until fully assembled.
5. Ensure the correct voltage is being used prior to plugging in your fan
(120V AC Electrical Outlet).
6. Unplug fan from outlet when not in use, when changing locations,before assembly or disassembly, or prior to
cleaning.
7. Do not immerse fan or expose fan to any form of liquid.
8. Avoid contact with all moving parts. Never insert your fingers,pencils or other objects through the fan grill
during operation.
9. Place your fan on a stable and level surface to avoid tipping or being knocked over accidentally.
10. Do not operate the fan directly adjacent to curtains, plants, window coverings, etc. to avoid accidental
entanglement.
11. For indoor household use only. Do not use outdoors or for industrial or commercial purposes.
12. To avoid potential fire hazards, never place your fan or its electrical cord under rugs, or carpeting.
13. Place the electrical cord away from busy areas to avoid accidental tripping and contact.
14. Always insert or remove plug from the outlet by grabbing the plug by hand. Do not pull on the electrical cord.
15. Never operate your fan near an open flame or in the presence of explosive or combustible gases or fumes.
16. Should your fan (including the electrical cord) ever become damaged or a malfunction occurs, discontinue
operation at once until a certified
repair has been made.
17. Do not expose your fan to excessive heat or humidity, as this can cause damage to the electrical components.
18. Keep your fan out of the reach of children and pets.
19. Do not expose infants or seniors to prolonged periods of direct cold air.
Fan Assembly
1. Carefully unpack the assembled fan from the Styrofoam packing
cradle.
2. Make sure to remove all plastic covers and Styrofoam prior to using.
3. You are now ready to enjoy your fan!
Fan Use
1. The “on/off” switch is located on the top of drum O I II
2. The fan has two speed when turned on
Trouble Shooting
PROBLEM CORRECTIVE ACTION
The fan will not operate
Confirm that the fan switch is not in the OFF position.
Confirm the plug connectors are perfectly joined.
Care & Cleaning
1. Be sure to unplug from the electrical supply source before cleaning..
2. Clean parts with a duster or damp cloth. Prior to resuming use, make
sure all moisture is dry.
3. Do not immerse in any type of liquid or use abrasive cleaning
solutions.
4. Use care around the motor housing as no excessive moisture or liquid