Adcom GFR-700 - Manual (Page 54)

54
Ch
ap
te
r 4 - O
pe
ra
ti
on
s
GFR-700 Owner’s Manual
Other Surround Modes
7.1 m 2
Uses an Adcom-proprietary digital pro-
cessing technology to expand incoming
stereo signals to 7.1-channel surround
sound. Use if:
• Your source component is connected to the ana-
log or digital audio inputs.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have seven speakers plus a subwoofer.
STEREO
Passes an incoming or downmixed stereo signal to
the front speakers. Use if:
• Your source component is connected to an ana-
log or digital audio input.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have at least two speakers (LF/RF), or would
simply would prefer to listen to a multi-channel
source through your two front speakers.
HALL
Creates a hall or amphitheater effect from an incom-
ing or downmixed stereo signal. Use if:
• Your source component is connected to an ana-
log or digital audio input.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have at least two speakers (LF/RF), or would
simply would prefer to listen to a multi-channel
source through your two front speakers.
5-STEREO
Generates maximum output for a five speaker sys-
tem. The rear speakers are driven with the same
signal as the front left and right, while the center
speaker is a monophonic summation of the front
speakers. Use if:
• Your source component is connected to an ana-
log or digital audio input.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have at five speakers (LF/RF, C, LS/RS).