Avenview C-DVIA-HDMI - Manual (Page 6)

www.avenview.com 6
1.7 Panel Description
FRONT PANEL
SPDIF In: 2 Channel Digital S/PDIF Audio Input
Audio In: 2 Channel Analog Audio Input thru the 3.5mm Earphone Jack
DVI In: Connect to a DVI source with DVI M-M Cable
REAR PANEL
HDMI Out: Connect to a HDMI display with HDMI M-M Cable
Green Light: Status Indicator
Control: 0 = Analog, 1 = S/PDIF Audio mode, 2 – 5 = Reserved, 6 = Use Default
Power: Power indicator; Red Light = Power ON
+5V DC: Power Connector
1.8 EDID Learning
1. Power up the C-DVIA-HDMI
2. Connect HDMI display to HDMI OUT
3. Turn the rotary control counter-clockwise from 0 to 7
4. The Green light will be bright and then dark to indicate the EDID is learned
5. Turn the rotary control clockwise from 7 to 0. DO NOT let the rotary control arrow pass 6, which will
erase the just learned EDID and reset to unit to default EDID.