Demon Fuel Systems 1905 - Manual (Page 15)

15
4. Disconnect the choke linkage by carefully removing the E-ring retainer from the choke rod (Fig. 22).
5. Disconnect the accelerator pump rod from the pump arm by carefully removing the c-clip (Fig. 23).
Figure 22 Figure 23
6. Remove the six Phillips head screws from the bottom of the carburetor as circled in (Fig. 24).
7. The carburetor air horn may now be carefully removed from the main body/fuel bowl assembly.
8. Invert the air horn to access the primary and secondary metering jets (Fig. 25). Check and adjust the float level
(Fig. 26).
9. Re-assemble in reverse order of removal.
Figure 24 Figure 25
Figure 26