EOTech XPS2-Z User Manual
Page 21
2.1.4
Electronic Features
All electronic controls are via pushbutton switches located at the rear of the unit housing as shown in
Fig. 4. To ensure proper operation of the pushbutton switches, press firmly on the center of the switch.
1. ON/ Auto Battery Check
Pressing the Up or Down Arrow pushbutton switches will turn the sight ON at Level 12. See item 4
under this section for a description of Auto shutdown. The sight will automatically perform a battery
check every time it is turned on. The reticle will blink when the batteries have between 2.5 and 5 hours
of useful life left.
2. OFF
To turn the sight off, simultaneously press both the UP and DOWN arrows. Verify that the sight is on/
off by looking through the heads-up display window for the reticle.
3. Brightness Adjustment
Pushbutton switches vary the brightness intensity of the holographic reticle pattern. Pressing and
releasing the pushbutton switches moves the brightness level UP or DOWN one (1) step from the
previous setting. Pressing and holding the UP arrow or DOWN arrow switch will change the brightness
level up or down continuously in steps. Twenty (20) brightness settings provide a dynamic range of
146,000:1 from the lowest setting to the highest setting.
13