Equus 3120 - OBD 2&1 Tool Kit - Manual (Page 7)

OBD2 & 1 5
E
About the Tool
BATTERY INSTALL / REPLACEMENT / ADJUSTMENTS/SETTINGS & DTC LIBRARY
BATTERY INSTALLATION / REPLACEMENT
Replace batteries when the battery symbol is visible on display
and/or the 3 LEDS are all lit and no other data is visible on screen.
1. Locate the battery cover on the back of the Tool.
2. Slide the battery cover off (use your fingers).
3. Replace batteries with three AA-size batteries (for longer life, use
Alkaline-type batteries).
4. Reinstall the battery cover on the back of the Tool.
Language Selection After Battery Installation
The first time the unit is turned on , you
must select the desired display language
(English, French or Spanish) as follows:
1. Press and hold the POWER/LINK
button for approximately 3 seconds to
turn the Tool “ON.”
■ The Select Language screen dis-
plays.
2. Use the UP and DOWN but-
tons, as necessary, to highlight the
desired display language.
3. When the desired display language is
selected, press the ENTER/FF but-
ton to confirm your selection.
After the initial language selection is performed, it, as well as
other settings, can be changed as desired. Proceed to
“ADJUSTMENTS/SETTINGS AND DTC LIBRARY” below for
further instructions.
ADJUSTMENTS/SETTINGS AND DTC LIBRARY
The OBD2 & 1 Tool lets you make several adjustments and settings to
configure the tool to your particular needs. It also contains an OBD2
DTC Library that allows you to search for DTC definitions. The follow-
ing functions, adjustments and settings can be performed when the
OBD2 & 1 Tool is in “MENU Mode”:
■ DTC Library: Lets you search the library of OBD2 DTC definitions.
■ Adjust Brightness: Adjusts the brightness of the LCD display
screen.
■ Select Language: Sets the display language for the Tool to
English, French or Spanish.